Random Posts
-
Restomod Car: 1 Engine
The Restomod Car series starts with the engine and the realities of reviving a long-stored 1996 Opel Astra project.
-
Amiga Next-Gen Build: 1 Sam440ep
An Amiga Next-Gen Build centered on the Sam440ep and the strange persistence of modern PowerPC Amiga hardware.
-
Guitar Pedals: 1 Splitter pedal: Two guitar amps at once
A tiny active splitter for running two guitar amps at once, with buffering, ground lift, and phase correction built in.
-
Guitar Rebuild: 1 Onboard preamps & hardware
A Japanese 1982 Matsumoku guitar becomes the basis for a rebuild focused on onboard preamps, hardware, and a heavier final voice.
-
Homelab: 2 Tiny 24 Core virtualization Computation with hacked hardware
A compact homelab build using repurposed server CPUs and hacked hardware to create a tiny 24-core virtualization machine.
Cat Tree
Say you want a cat tree on your balcony, buying one covered in fluff, like most are, is clearly a bad idea. Tossing something together from leftover wood and winding some sisal-rope however, a nice gift to your furry friend.
Attaching the end of the somewhat fragile sisal-rope to the beams, I wrapped the ends in leather which were glued to the rope and after that drilled into the wood. Another big time-saver is using 90 degree, flat irons to support each layer. Last part would be to try and get the leftover sheets somewhat water resistant. The ones I had access to were actually the worst type when it comes to this, however with some yearly reapplication of cellulose clear coat to seal, primarily on the ends, the tree is still standing.
The tree did also do well inside before the move to the balcony. Although with some very ugly carpet..
More in this section
More in Workshop / Misc